UNloil Universal Oil Spray 500ml

Bossklein UNIoil delivers exceptional lubrication for all types of dental handpieces, including high-speed, slow-speed, and air motors. Its exclusive formula combines complex oil, silicone, and anti-rust inhibitors to protect vital internal bearings from micro rust, ensuring optimal performance and durability.

Pressurised up to 70psi, each 500ml can of UNIoil provides high penetration for thorough lubrication, maximising internal bearing rotation while coating all surfaces effectively.

Proper handpiece care, including regular lubrication with UNIoil, can significantly extend equipment lifespan, reducing the need for costly repairs or replacements. Additionally, UNIoil effectively removes debris and buildup from internal surfaces, promoting hygiene and compliance with infection control standards—essential in areas where maintenance is legally mandated.

Key Features:

• Suitable for all major handpiece brands, including Kavo, W&H, and Bein Air, thanks to universal fittings.
• Enhances patient safety and equipment efficiency.
• Includes a transport cap to prevent accidental discharge and dust accumulation.

HTM 01-05 Compliance

3.55: Handpieces should be lubricated according to the manufacturer’s instructions. Those that have been processed in a washer-disinfector might have had the lubricant removed and require lubrication again before going into the steriliser.

3.56: A separate canister of lubricant should be used for cleaned instruments. The canisters should be labelled so that it is clear which canister is used for unclean instruments and which is used for instruments that have been cleaned in a washer-disinfector. Another canister for use with handpieces after sterilisation might be required if the manufacturer recommends it.

3.57: Inadequate lubrication can lead to unnecessary damage to the internal mechanism.

Physical Properties

Clear in colour, aerosol, peppermint aroma, Shelf life of 3 years. High penetrative ability to ensure thorough coating of bearing surface. Each can contains a high volume pressure to provide maximum bearing rotation during oiling. High internal pressure of 70+Psi (4.8atm) at 20°C. Cans are to UN specification,  includes a dust cap.